Customization: | Available |
---|---|
After-sales Service: | One Year Warranty |
Condition: | New |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Heller Industries Model 1913MK7 | ||
Model | 1913MK7 (Air) | 1913MK7 (Nitrogen) |
Electric Supply | ||
Power Input (3 Phase) Standard | 480 volts | 480 volts |
Breaker Size | 100 amps @ 480v | 100 amps @ 480v |
kW | 9 - 15 Continuous | 9 - 15 Continuous |
Typical Run Current | 25 - 35 amps @ 480v | 25 - 35 amps @ 480v |
Optional Power Inputs Available | 208/240/380/400/415/440/480 VAC | 208/240/380/400/415/440/480 VAC |
Frequency | 50/60 Hz | 50/60 Hz |
Sequential Zone Turn On | S | S |
Dimensions | ||
Overall Oven Dimensions | 232" (590cm) L x 60" (152cm) W x 57" (144cm) H |
232" (590cm) L x 60" (152cm) W x 57" (144cm) H |
Typical Net Weight | 4898 lbs. (2220 kg) | 5560 lbs. (2520 kg) |
Typical Shipping Weight | 6266 lbs. (2840 kg) | 6928 lbs. (3140 kg) |
Typical Shipping Dimension | 620 x 185 x 185 cm | 620 x 185 x 185 cm |
Computer Control | ||
AMD or Intel Based Computer | S | S |
Flat Screen Monitor w/Mount | S | S |
Windows Operating System | Windows 10 Home | Windows 10 Home |
Auto Start Software | S | S |
Data Logging | S | S |
Password Protection | S | S |
LAN Networking | O | O |
Inert Atmosphere | ||
Minimum PPM Oxygen | - | 10-25 PPM* |
Waterless Cooling w/ Flux | ||
Separation System | - | O |
Nitrogen On/Off Valve | - | O |
Oxygen Monitoring System | - | O |
Nitrogen Standby System | - | O |
Typical Nitrogen Consumption | - | 500 - 700 SCFH ** |
Additional Features | ||
KIC Profiling Software | S | S |
Signal Light Tower | S | S |
Powered Hood Lift | S | S |
Five (5)Thermocouple Profiling | S | S |
Redundant Alarm Sensors | O | O |
Intelligent Exhaust System | O | O |
KIC Profiler / ECD Profiler | O | O |
Center Board Support | O | O |
Board Drop Sensor | O | O |
Board Counter | O | O |
Bar Code Reader | O | O |
Custom Paint & Decal | O | O |
Battery Backup for Conveyor and PC | O | O |
GEM/SECS Interfacing | O | O |
Mesh Belt Conveyor | ||
Height From Floor | 36.6" + 2.4" (93 cm + 6 cm) | 36.6" + 2.4" (93 cm + 6 cm) |
Maximum PCB Width | 22" (56 cm) | 22" (56 cm) |
Space Required Between PCB's | 0.0" (0.0 cm) | 0.0" (0.0 cm) |
Conveyor Length On-Load | 18" (46 cm) * | 3" (7.5 cm) * |
Conveyor Length Off-Load | 18" (46 cm) * | 3" (7.5 cm) * |
Heated Tunnel Length | 140" (355 cm) | 140" (355 cm) |
Process Clearance Above Mesh Belt | 2.3" (5.8 cm) | 2.3" (5.8 cm) |
Mesh Belt Pitch | 0.5" (1.27 cm) | 0.5" (1.27 cm) |
Maximum Conveyor Speed | 74"/Min (188 cm/min.) | 74"/Min (188 cm/min.) |
Conveyor Direction Left to Right | S | S |
Conveyor Direction Right to Left | O | O |
Conveyor Speed Control | Closed Loop | Closed Loop |
Edge Hold Conveyor System Option | ||
Height from Floor - Standard | 37.8" ±2.4" (96 cm ± 6 cm) | 37.8" ±2.4" (96 cm ± 6 cm) |
Height from Floor - Optional | 35.4" ± 2.4" (90 cm ± 6 cm) |
35.4" ± 2.4" (90 cm ± 6 cm) |
Clearance Above & Below Conveyor Pins | 1.15" (2.9 cm) | 1.15" (2.9 cm) |
Length of PCB Support Pins | .187" (4.75 mm) | .187" (4.75 mm) |
3 mm long support pins | O | O |
Minimum/Maximum Board Width | 2" - 22" (5 - 56 cm) 24" (61cm) Optional** |
2" - 22" (5 - 56 cm) 24" (61cm) Optional** |
Power Width Adjustment | S | S |
Computer Controlled Width Adjust | O | O |
Auto Lubrication System | S | S |
Forced Convection Zones | ||
Top & Bottom | 13 | 13 |
Heater Type | Instant response open coil | Instant response open coil |
Heater Material | Nichrome | Nichrome |
Profile Change Time | 5 - 15 minutes | 5 - 15 minutes |
Temperature Control | ||
Accuracy of Temperature Controller | ± .1ºC | ± .1ºC |
Cross-Belt Temperature Tolerance | ±3.0°C | ±3.0°C |
Heater Wattage Per Zone | 5400 w*** | 5400 w*** |
Temperature Range Standard | 60-350ºC | 60-350ºC |
High Temperature Up to 450ºC | O | O |
Cooling Systems | ||
Number of Cooling Zones Standard | 3 | 3 |
Cooling zone Length | 107cm | 115cm |
Additional Cooling Zones | O | O |
Water Cooling | - | O |
Notes: | S = Standard, O = Optional. |
1. What products can you provide?
The Thermal Technology Leader in Semicon and SMT
2,What we can do for you?
One-stop SMT Solution Supplier; Reliable SMT Partner.
3,Can you customize it?
OEM & ODM service are available.
4,What is your payment terms?
30% deposit in advance and 70% balance before shipment And Multiple options
5,Why choose you?
Professional after-sales service team.